Living and enantiomer-selective polymerization of allene initiated by Ni complex containing chiral phosphine

In the polymerization of chiral allene by using chiral phosphine complex, the polymerization rate of L-1 is approximately 1.9 times that of D-1. This catalyst has enantiomer-selectivity for the polymerization of chiral allene derivative monomer.     

基本养老保险缴费心理活动维度的实证研究:个人心理账户视角

本文从心理账户理论视角,通过问卷调查,运用非集计模型,对个人基本养老保险缴费心理活动维度进行了实证研究。研究结果表明,受教育程度、非常规的额外收入、经营性收入、安全型保障账户和风险型存储账户是影响缴费的关键性因素,进而提出引导设立特定缴费心理账户、增强缴费制度弹性,改变缴费者的选择框架, 提升缴费遵从度。     

密度泛函理论方法研究填料表面对聚合物摩擦化学的影响

采用超声分散法制备出氧化铝、高岭土、氧化硅/聚四氟乙烯复合材料, 使用线性往复摩擦磨损试验机对比三种复合材料的摩擦学性能. 结果表明 质量分数10%的氧化铝、高岭土能将聚四氟乙烯的磨损率降低约4个数量级, 而氧化硅仅能降低约3个数量级. 对金属对偶表面形成的转移膜的形貌和化学成分进行分析发现 氧化铝、高岭土/聚四氟乙烯在金属对偶面上形成了高度羧酸盐化的转移膜. 用密度泛函理论对三种填料表面上碳氟分子吸附过程进行模拟, 结果显示氧化铝、高岭土表面的路易斯酸性位点促进了碳氟分子的脱氟过程, 产生了更多的羧酸螯合物的中间产物; 氧化硅缺少路易斯酸性位点, 因此不能促进高度羧酸盐化的转移膜形成.     

Microstructural model for cyclic hardening in F-actin networks crosslinked by α-actinin

The rheology of F-actin networks has attracted a great attention during the last years. In order to gain a complete understanding of the rheological properties of these novel materials, it is necessary the study in a large deformations regime to alter their internal structure. In this sense, Schmoller et al. (2010) showed that the reconstituted networks of F-actin crosslinked with α-actinin unexpectedly harden when they are subjected to a cyclical shear. This observation contradicts the expected Mullins effect observed in most soft materials, such as rubber and living tissues, where a pronounced softening is observed when they are cyclically deformed.We think that the key to understand this stunning effect is the gelation process. To define it, the most relevant constituents are the chemical crosslinks – α-actinin –, the physical crosslinks – introduced by the entanglement of the semiflexible network – and the interaction between them. As a consequence of this interaction, a pre-stressed network emerges and introduces a feedback effect, where the pre-stress also regulates the adhesion energy of the α-actinin, setting the structure in a metastable reference configuration. Therefore, the external loads and the evolvement of the trapped stress drive the microstructural changes during the cyclic loading protocol. In this work, we propose a micromechanical model into the framework of nonlinear continuum mechanics. The mechanics of the F-actin filaments is modelled using the wormlike chain model for semiflexible filaments and the gelation process is modelled as mesoscale dynamics for the α-actinin and physical crosslink. The model has been validated with reported experimental results.     

J正交矩阵的一些性质

给出了J正交矩阵的一些性质．     

Dielectric loss and electromagnetic absorption performance study of 1T/2H-MoS2/Mo2S3 nanocomposites with different ratios

High dielectric loss materials have an important application in electromagnetic (EM) absorption fields. In this paper, the ternary nanocomposites: 1T/2H-MoS₂/Mo₂S₃ with heterogeneous interfaces are synthesized by hydrothermal method. XRD, XPS, FTIR, SEM, and TEM measurements are applied to study the structure, morphology, and composition. The frequency spectra of complex permittivity (ε_r-f) are measured in 2–18 GHz by vector network analyzer. The results show that the nanocomposites have higher dielectric loss angle tangents than the reported 2H-MoS₂ absorbers. Based on the ε_r-f spectra, the reflection loss-frequency curves ($RL-f$) are simulated at given thicknesses. An effective absorption bandwidth of 5.2 GHz (12.8–18 GHz) and a $RL$ peak of −29.49 dB are achieved in a thin thickness of 1.62 mm, which are comparable to the reported 2H-MoS₂ absorbers with complex composition, showing that the 1T/2H-MoS₂/Mo₂S₃ nanocomposites have great application potential as an EM wave absorber in the K_u band.     

曲轴轴向运动对粗糙表面曲轴主轴承润滑性能影响的研究

内燃机实际工作中，在多种影响因素综合影响下，曲轴进行旋转运动的同时，还存在沿轴承轴线方向的运动. 以某四缸四冲程内燃机曲轴-轴承系统为研究对象，综合考虑曲轴轴向运动、曲轴变形和摩擦表面粗糙度，基于平均Reynolds方程，建立了耦合曲轴轴向运动的粗糙表面主轴承润滑分析模型，着重研究了倾斜曲轴轴向运动对主轴承润滑特性的影响. 分析中，采用试验法实测曲轴沿轴承轴线方向的运动规律，应用有限单元法求解曲轴受载变形导致轴颈在轴承孔中倾斜状况. 结果表明:曲轴轴向运动对粗糙表面内燃机主轴承润滑特性影响显著；计及曲轴轴向运动时内燃机各主轴承轴颈轴心轨迹均为1条不封闭的三维空间曲线；曲轴轴向运动对主轴承润滑特性的影响程度与摩擦表面粗糙度直接相关；计及曲轴轴向运动时摩擦表面粗糙度对主轴承润滑特性影响趋势及程度均发生明显变化.